Panther USA.
No awkward steering from the stern.
Comes complete with two quick disconnect ball joint assemblies and 610mm (24") connector rod (tie bar) which can be shortened (down to 300mm/12") to the exact length required.
Brackets & clamps for attaching the ball joints to each motor are included.
Drill a 10mm hole to mount the ball joint.
Suitable for trolling/auxiliary motors up to 25hp.
3/8"-24 thread on rod & stud.
Zinc plated steel for fresh water use only. Keep ball joints greased.
Auxiliary Motor Steering Kit - Zinc
An auxiliary motor steering kit is the ideal way to provide remote control steering for any type or size of outboard trolling motor up to 25 horse-power. The model 55-2400 is constructed of Zinc plate steel.
Fresh Water Steering Link Kit
Panther (USA) brand.
Comes complete with two quick disconnect ball joint assemblies.
For engines 66cm (26”) apart centre-centre. Reducible to 29cm (11.4”) by shortening (e.g. use a hacksaw) the included threaded connector rod (61cm/24” long).
Installation note: it is very important that the quick release ball joints are not binding (and the tie bar is not striking any part of the boat or a engine) when the main engine steering is turned through its whole range. Check this by turning the steering slowly through its whole range while checking that the tie bar assembly still has movement (play) in it. If not, stop and adjust the installation, then recheck e.g. reshape the tie bar.
KEYWORDS:
Panther Marine Fresh Water Steering Link Kit, panther, steering link, trolling kit, trout trolling, fresh water, outboard link kit, TEN-ST215,
Panther USA.
No awkward steering from the stern.
Comes complete with two quick disconnect ball joint assemblies and 610mm (24") connector rod (tie bar) which can be shortened (down to 300mm/12") to the exact length required.
Brackets & clamps for attaching the ball joints to each motor are included.
Drill a 10mm hole to mount the ball joint.
Suitable for trolling/auxiliary motors up to 25hp.
3/8"-24 thread on rod & stud.
Zinc plated steel for fresh water use only. Keep ball joints greased.
Auxiliary Motor Steering Kit - Zinc
An auxiliary motor steering kit is the ideal way to provide remote control steering for any type or size of outboard trolling motor up to 25 horse-power. The model 55-2400 is constructed of Zinc plate steel.
Fresh Water Steering Link Kit
Panther (USA) brand.
Comes complete with two quick disconnect ball joint assemblies.
For engines 66cm (26”) apart centre-centre. Reducible to 29cm (11.4”) by shortening (e.g. use a hacksaw) the included threaded connector rod (61cm/24” long).
Installation note: it is very important that the quick release ball joints are not binding (and the tie bar is not striking any part of the boat or a engine) when the main engine steering is turned through its whole range. Check this by turning the steering slowly through its whole range while checking that the tie bar assembly still has movement (play) in it. If not, stop and adjust the installation, then recheck e.g. reshape the tie bar.
KEYWORDS:
Panther Marine Fresh Water Steering Link Kit, panther, steering link, trolling kit, trout trolling, fresh water, outboard link kit, TEN-ST215,