cart Shopping Cart YOU HAVE (0) ITEMS
SAME DAY, $5 FLAT RATE SHIPPING*
FULL NZ WARRANTY ON ALL PRODUCTS
5066

Mansfield Lead Ladle - Small 2lb

CSC-903

$38.00
GST Incl - NZ purchases only
Qty.
Mansfield Lead Ladle - Small 2lb

This mould is made out of the original Mansfield Sinker Mould, Moulds.
The ladle holds 2lb of molten lead. It has two pouring lips, one fine the other broad, for the various moulds. Robust 210mm wooden handle screws into ladle. Handle itself is 110mm long. Overall length is 320mm.  
Weight of lead held:
2lb

Made from Cast Iron

MANSFIELD SINKER MOULDS ARE PROUDLY MADE IN NEW ZEALAND

Instructions for Mansfield Do-It-Yourself Sinkers
Sourcing Lead
Most of you will have some scrap lead lying around. Try visiting your local roofer/plumber or scrap dealer. Lead is worth around a $1 or $2 per kilo. Another excellent source is to use discarded wheel weights from your local tyre shop. These weights have a hardener added to them and work superbly as sinker and jig material. Although less durable for jigs, pure lead does work very well for us, so don't be put off using it!
Melting Your Lead
The secret to making sinkers and jigs in volume is to have a large amount of lead in a molten state.  To achieve this use a Mansfield Melting Pot which is curved inside to allow a ladle to scoop lead easily. Although not as effective, a cast iron pot will do at a pinch. Use a gas ring or BBQ to melt the lead.
Ensure that you use adequate ventilation when melting lead as the fumes are toxic. A common mistake is not to melt your lead to a "bronze" colour which is substantially hotter than a liquid state. DO NOT under any circumstances allow moisture or water to get in contact with molten lead; it splatters dangerously!
Pouring the Lead into your Mould
Scrape off any impurities from your lead by simply scooping off the top layer of "rubbish" that forms once your lead has melted. Heat up your mould before pouring the molten lead into the mould. You may be using a hinged mould which can be clamped together using a D clamp.
Use a ladle to pour the molten lead into you mould. Open mould once lead has cooled sufficiently (this only takes a few seconds). Once the sinkers are completely cool, then remove them from the moulds.

KEYWORDS:
Mansfield Lead Ladle - Small 2lb, mansfield, lead ladle, sinker ladle, lead ladel, lead scoop, Mansfield Mould Ladle Small 2lb,

You might also be interested in ...

Dive Weight Mould - 1lb (0.45kg)
$62.00
GST Incl - NZ purchases only
Dive Weight Mould - 3lb (1.5kg)
$45.00
GST Incl - NZ purchases only
Dive Weight Mould - 4lb (1.81kg)
$68.00
GST Incl - NZ purchases only
Mansfield Lead Melting Pot - 50lb
$96.00
GST Incl - NZ purchases only