Holux M-1000 Bluetooth GPS Receiver

Overview

The Newest MTK (Media Tek Inc.,) total solution Bluetooth GPS receiver. High sensitivity, easy to track satellite signal for better performance！
The HOLUX M-1000 Wireless Bluetooth GPS Receiver is a total solution GPS receiver with Bluetooth, UART interface and built-in rechargeable battery for high sensitivity to tracking signal. M-1000 design is based on Media Tek Inc.(MTK) GPS solution - MT3318 low power Architecture.
With the advanced technology, the M-1000 tracks up to 32 satellites at a time, re-acquires satellite signals in 100 ns and updates position data every second. Trickle-Power allows the unit operates a fraction of the time and Push-to-Fix permits user to have a quick position fix even though the receiver usually stays off.

Features 

Built in MTK MT3318 Low power consumption GPS chipset. 
32 parallel satellite-tracking channels for fast acquisition and reacquisition. 
Superior sensitivity up to -159 dBm. 
Built-in WAAS/EGNOS Demodulator without any additional hardware. Or use the high-sensitive software to get the fast acquisition and reacquisition in the urban, canyon and foliage environments. 
Compatible with Bluetooth Serial Port Profile (SPP) completely. 
Low power consumption. Built-in rechargeable and changeable Lithium-ion battery, the working time can last 23 hours maximum. 
Provide expand terminal contact to other system without Bluetooth device. 
Support NMEA0183 V 3.01 data protocol 
3 color-LEDs indicate to show the status of device. 
FLASH based program memory. New software revisions upgradeable through serial interface 
Small, sleek, and lightweight design easily fits in your hand. 
Over-Temperature protection 
Enhanced algorithms -SnapLock and SnapStart provide superior navigation, performance in urban, canyon and foliage environments. 

For Car navigation, Marine navigation, Fleet management, AVL, Personal navigation, Tracking System, and Mapping device application.


Basic Specification: 
Chipset：MTK MT3318 chipset. 
Channels： 32 parallel satellite-tracking channels. 
Frequency： 1575.42 MHz 
Receiver： L1, C/A code.

Acquisition Time (refer to MTK chip specification) 
Reacquisition： 0.1 second. 
Cold start： < 36 seconds. 
Warm start：< 33 seconds . 
Hot start： < 1 second 

Receiver Accuracy 
Normal： < 3 meters CEP without SA. 
Enable EGNOS or WAAS：. 
Position：< 2.2 meters, horizontal 95% of time < 5 meters, Vertical 95% of time 
Velocity： within 0.1 meters / second
Time： 0.1 microsecond synchronized GPS time

Use Limitation 
Altitude： < 18,000 meters (60,000 feet) 
Velocity: ：< 515 meters/ second (1000Knots) 
Acceleration： 4 G. 
Jerk： 20 meters / second3, max

Power Supply 
External Voltage: 5VDC +/-5% 
Batteries： 
Main Power: Built-in rechargeable Lithium-ion for system power. 
Backup Power: Rechargeable Lithium-ion battery for memory backup. 
Working voltage: 40~50mA (Normal mode).　 35mA (Power Saving). 
Auto Power Saving mode. 
Circuit protection on M-1000 when over-temperature condition - 50 occurs.

Output and Interface 
Output 
Output protocol 
Baud Rate： 38400 bps 
Data bit： 8 
Parity： No 
Stop bit： 1 
Format. NMEA0183 V3.01： GPGGA (1time/1 sec), GPGSA (1 time/5 sec.), GPGSV (1time /5 sec.), GPRMC (1time /1 sec.), GPVTG (1 time/1 sec), (GLL, or MTK NMEA Command for optional). 
Datum： WGS84. 
Input/ Output Interface: 
Compatible Bluetooth Serial Port Profile (SPP), Version1.2 and class 2(up to 10 meter range). 
In/Out Port. GPS signal (Out)/Command(In) with CMOS Level。Mini USB Type B Connector and Cable option： 
GR230-A2 (USB data cable) 

Physical 
Size： 65 × 43 × 17.6 mm 
Weight： < 53 g 
Operating Temperature：-10 to + 60 (under the un-charging condition); Charging Temperature： 0 to + 45 ℃ 
Storage Temperature：-20 to + 60 ℃ 
Operating humidity： 5% to 95% No condensing

Other Functions 
Bluetooth frequency: 2.4 ~2.48GHz 
Bluetooth Input Sensitivity: -85dBm 
Low sensitivity of receiving satellite signal ： -159 dBm 
LED Functions： Indicate Bluetooth status, GPS status, Battery Status and Battery charging status