You may choose a small or a medium crome plated gunmetal Stemhead.
Both, feature a roller and captive  retaining pin.

• FEATURES:
• Crome Plated Gunmetal
• Roller
• Captive retaining Pin
• SMALL:- (ST12) Dimensions: 118mm long X 70mm Wide 24mm Horizontal Gap in fairlead.
• (The two aft 1/4" countersunk mounting holes on 52mm centres.
  The third hole is 43mm forward of the aft two and on the centre line.)
• MEDIUM:- (ST125) Dimensions: 145mm Long X 90mm Wide 28mm Horizontal Gap in fairlead.
• (The two aft 1/4" countersunk mounting holes on 2.1/2" (63.5mm) centres.
  The third hole is 2.1/4" (57.2mm) forward of the aft two and on the centre line.)

Please Make your Size Choice Below: